Dongguan Linkun Electronic Technology Co., Ltd.
Dongguan Linkun Electronic Technology Co., Ltd.
Add to Cart
CWF 5K 10K 50K 100K 3950 1% Household Water Dispenser Temperature Sensor Ntc Thermistor High Voltage Conduction Fast
NTC temperature sensors are usually composed of 2 or 3 metal oxides, mixed in a fluid-like clay, and calcined into a dense sintered ceramic in a high-temperature furnace. Oxygen-bonded metals tend to donate free electrons. Ceramics are generally excellent insulators. But only theoretically, this is the case for thermistor-type ceramics when the temperature approaches absolute zero. However, as the temperature increases to more common ranges, thermal excitations eject more and more free electrons. As more electrons carry current through the ceramic, the effective resistance decreases. Resistance changes very sensitively with temperature. A typical change is a decrease of (-)7[%] to 3[%] per degree Celsius. This is the most sensitive of any sensor suitable for use over a wide temperature range.
The rated room temperature resistance depends on the resistivity of the base material, the size and geometry, and the contact area of the electrodes. Thick and narrow thermistors have relatively high resistance, while thin and wide shapes have lower resistance. Actual size is also very flexible, they can be as small as .010 inches or very small diameter. There is almost no limit to the maximum size, but usually under half an inch applies.
NTC temperature sensor product features
◆ Using a new technology, the product performance is stable, and it can work stably for a long time (annual resistance value drift rate ≤ 3‰)
◆ Resistance value and B value have high precision, good consistency, and are interchangeable (resistance value and B value accuracy can reach ±1% respectively)
◆ High sensitivity and rapid response
◆ Using double-layer sealing technology, it has good insulation sealing and anti-mechanical collision and anti-bending capabilities
◆ It can be packaged according to the installation conditions used, which is convenient for users to install; it can be made into high-dissipation products, and the test current can be much higher than that of sensors with traditional structures, which simplifies the application circuit
| Certificates for Raw Material | All parts and processing is compliant with ROHS, CCC |
| Certificates for Wire Harness Material | UL/CSA,CE, VDE,SAA,CB,ISO9001 etc are avalable; PA66 for connectors; copper or stainless steel for terminals |
| Length | As per customer’s request |
| Connector Type | Tyco, Delphi, Bosch, Deutsch, Yazaki, Sumitomo, FCI replacements |
| Service | Different series of customized CAD wire harness are available |
NTC temperature sensor application range
◆Heating and heating air conditioners and related equipment
◆Household appliances of various sizes: air conditioners, refrigerators, battery stoves, bread ovens, baking ovens, electric ovens, microwave ovens, electric fans, soybean milk machines, electric water heaters, electric rice cookers, disinfection cabinets, water dispensers, heaters, electric irons, disinfection Cabinets, drinking fountains, lighting appliances, etc.
◆Temperature measurement and control circuits for agricultural, medical, environmental protection, meteorological, food processing and other equipment
◆Instrument coils, automotive circuits, integrated circuit modules, transistor amplifier circuits, temperature compensation circuits such as quartz crystal oscillators and thermocouples
| Part No. | R25℃ (KΩ) | B(K) 25/50℃ | Rated Power @25℃(mW) | Dissipation Factor(δ) (mW/℃) | Thermal time Constant (S) |
| TS502□3274A | 5.0 | 3274 | 10-20 | 2-4 | 5-20 |
| TS502□3435B | 5.0 | 3435 | 10-20 | 2-4 | 5-20 |
| TS502□3470A | 5.0 | 3470 | 10-20 | 2-4 | 5-20 |
| TS502□3950A | 5.0 | 3950 | 10-20 | 2-4 | 5-20 |
| TS103□3274A | 10.0 | 3274 | 10-20 | 2-4 | 5-20 |
| TS103□3435B | 10.0 | 3435 | 10-20 | 2-4 | 5-20 |
| TS103□3470A | 10.0 | 3470 | 10-20 | 2-4 | 5-20 |
| TS103□3950A | 10.0 | 3950 | 10-20 | 2-4 | 5-20 |
| TS103□4100A | 10.0 | 4100 | 10-20 | 2-4 | 5-20 |
| TS153□3950A | 15.0 | 3950 | 10-20 | 2-4 | 5-20 |
| TS153□4100A | 15.0 | 4100 | 10-20 | 2-4 | 5-20 |
| TS203□3950A | 20.0 | 3950 | 10-20 | 2-4 | 5-20 |
| TS203□4100A | 20.0 | 4100 | 10-20 | 2-4 | 5-20 |
| TS223□4200A | 22.0 | 4200 | 10-20 | 2-4 | 5-20 |
| TS403□3928A | 40.0 | 3928 | 10-20 | 2-4 | 5-20 |
| TS503□3950A | 50.0 | 3950 | 10-20 | 2-4 | 5-20 |
| TS503□4100A | 50.0 | 4100 | 10-20 | 2-4 | 5-20 |
| TS104□3950A | 100.0 | 3950 | 10-20 | 2-4 | 5-20 |
| TS104□4100A | 100.0 | 4100 | 10-20 | 2-4 | 5-20 |
| TS104□4400A | 100.0 | 4400 | 10-20 | 2-4 | 5-20 |
Reliability Test
| Test Item | Test Standard | Test method | Performance requirements |
| Zero Power Resistance | IEC 60539-1 | Immerse samples in the constant temperature bath at 25℃±0.005℃,test steady resistance | Resistance tol ±1%
|
| B value | IEC60539-1 | Immerse samples in the constant temperature bath at 25℃,50℃(or 85℃), test steady resistance,and calculate B value | Resistance tol ±1%
|
| Free fall | IEC60068-2-32
| Fall height: 1.5±0.1m,Surface: Cement , 1 time | No obvious damage, R25 △R/R≤±1%
|
| Insulation | IEC60539-1
| 500V pressure on insulation shell test insulation resistance | >500MOhm
|
| Withstand voltage | IEC60539-1 | Withstand voltage: 1500V/AC ,Leakage current:2mA Lasting: 60sec
| No obvious damage
|
| Tension | IEC60068-2-21 | Pull uniform speed at the end, F>4.0KG(requested by customer)
| No obvious damage, R25 △R/R≤±1%
|
| Vibration | Q/HBm 108-94 | Test frequency: 10~500Hz,swing: 1.2mm acceleration: 30m/s2 Direction X,Y,Z Time:8Hour/direction | No obvious damage, R25 △R/R≤±1%
|
| Steady humidity and heat | IEC60068-2-78 | Temp:40±2℃ Humidity:92-95%RH Time:1000±24Hour | No obvious damage, R25 △R/R≤±1%
|
| Thermal time constant | EC60539-1 | Immerse in 25℃ water,after thermal balance,immerse in 85℃,resistance arrives 63.2%,calculate total time | <10 sec
|
| High temperature storage | IEC60068-2-2 | Temp:125℃±5℃ Time: 1000±24Hour | No obvious damage, R25 △R/R≤±1% |
| Cold and thermal shock | IEC60068-2-14 | -40℃~+125℃ T1:30min Cycle time:1000
| No obvious damage, R25 △R/R≤±1%
|
| Knock experiment | IEC60068-2-77 | Acceleration:250m/s2 Pulse lasting: 6ms Knock times: 1000 Recovery time: 2 Hour
| No obvious damage, R25 △R/R≤±1%
|
| Low temperature storage | IEC60068-2-1 | Temp: 40±2℃ Time: 1000±24Hour
| No obvious damage, R25 △R/R≤±1%
|
| Salt spray | IEC60068-2-11 | Temp: 35±2℃ Collection hour : 1.0mL~2.0mL Time: determine per as actual demand | No obvious damage, R25 △R/R≤±1%
|
Working principle of temperature sensor
Using the NTC thermistor under a certain measurement power, the resistance value drops rapidly as the temperature rises. Utilizing this feature, the NTC thermistor can be used to determine the corresponding temperature by measuring its resistance value, so as to achieve the purpose of detecting and controlling the temperature.